Article: IEDM 2010 Process Technology Update
By: David Kanter (dkanter.delete@this.realworldtech.com), February 15, 2011 8:49 pm
Room: Moderated Discussions
slacker (s@lack.er) on 2/15/11 wrote:
---------------------------
>Good article.
>
>Two questions about page 4:
>
>1. What was the inductance of the inductor measured in >figure 5?
It doesn't say in the paper. It may have been mentioned in the talk, but I don't recall.
There's a separate paper from 2010 that has inductance vs. Q, and they achieved ~25 Q at 1nH, ~20 Q at 6nH and ~12 Q at 9nH.
What exactly is the relationship between inductance, frequency and quality for inductors?
>2. Isn't the top metal 7um thick, not 8um ?
It's 7um.
David
---------------------------
>Good article.
>
>Two questions about page 4:
>
>1. What was the inductance of the inductor measured in >figure 5?
It doesn't say in the paper. It may have been mentioned in the talk, but I don't recall.
There's a separate paper from 2010 that has inductance vs. Q, and they achieved ~25 Q at 1nH, ~20 Q at 6nH and ~12 Q at 9nH.
What exactly is the relationship between inductance, frequency and quality for inductors?
>2. Isn't the top metal 7um thick, not 8um ?
It's 7um.
David
Topic | Posted By | Date |
---|---|---|
IEDM 2010 article online | David Kanter | 2011/02/15 01:59 AM |
IEDM 2010 article online | Ricardo B | 2011/02/15 05:54 AM |
IEDM 2010 article online | David Kanter | 2011/02/15 09:37 AM |
IEDM 2010 article online | Ricardo B | 2011/02/15 03:03 PM |
IEDM 2010 article online | slacker | 2011/02/15 06:15 PM |
IEDM 2010 article online | IntelUser2000 | 2011/02/15 06:54 PM |
IEDM 2010 article online | David Kanter | 2011/02/15 08:49 PM |
IEDM 2010 article online | David Hess | 2011/02/16 02:40 AM |
IEDM 2010 article online | Ricardo B | 2011/02/16 07:01 AM |
IEDM 2010 article online | IntelUser2000 | 2011/02/17 09:21 AM |
Answer: 8um | slacker | 2011/02/17 10:01 AM |
IEDM 2010 article online | someone | 2011/02/17 09:14 AM |
IEDM 2010 article online | iz | 2011/02/17 06:31 PM |
IEDM 2010 article online | iz | 2011/02/17 07:04 PM |
Also fixed | David Kanter | 2011/02/17 07:47 PM |
IEDM 2010 article online | David Kanter | 2011/02/17 07:43 PM |