Article: 22nm Design Challenges at ISSCC 2011
By: savantu (savantu.delete@this.email.ro), March 15, 2011 5:25 am
Room: Moderated Discussions
David Kanter (dkanter@realworldtech.com) on 3/14/11 wrote:
---------------------------
>Dean Calver (deano@cloudpixies.com) on 3/14/11 wrote:
>---------------------------
>>The implication that chip design will need to become more >aware of the physical
>>processes of fabrication, seems to require a change in >knowledge and education base of the designers.
>
>For some designers it's not an issue. If they understand the physics, they will
>know the implications and be able to adjust.
>
>However, if they are looking from the perspective of viewing the chip as a perfect
>digital device that is represented by the RTL and software models...then they are in for a bit of a surprise.
>
But isn't all this vey well known for like 20 years ?
I mean I am pretty sure Willamete designers were intimately aware of process limitations and so on.
What were all the DFM and design-to-cost aproaches doing in the past decade ?
---------------------------
>Dean Calver (deano@cloudpixies.com) on 3/14/11 wrote:
>---------------------------
>>The implication that chip design will need to become more >aware of the physical
>>processes of fabrication, seems to require a change in >knowledge and education base of the designers.
>
>For some designers it's not an issue. If they understand the physics, they will
>know the implications and be able to adjust.
>
>However, if they are looking from the perspective of viewing the chip as a perfect
>digital device that is represented by the RTL and software models...then they are in for a bit of a surprise.
>
But isn't all this vey well known for like 20 years ?
I mean I am pretty sure Willamete designers were intimately aware of process limitations and so on.
What were all the DFM and design-to-cost aproaches doing in the past decade ?
Topic | Posted By | Date |
---|---|---|
Design Challenges at 22nm Article | David Kanter | 2011/03/14 01:36 AM |
Design Challenges at 22nm Article | Dean Calver | 2011/03/14 02:06 AM |
Design Challenges at 22nm Article | David Kanter | 2011/03/14 09:06 PM |
Design Challenges at 22nm Article | savantu | 2011/03/15 05:25 AM |
Roots of this problem go way back. | someone | 2011/03/14 07:00 AM |
Education | Moritz | 2011/03/15 04:42 AM |
Education | someone | 2011/03/15 07:26 AM |
Education | Moritz | 2011/03/15 12:44 PM |
Education | sylt | 2011/03/18 10:31 AM |
Roots of this problem go way back. | Rob Thorpe | 2011/03/15 06:25 AM |
Roots of this problem go way back. | someone | 2011/03/15 07:20 AM |
Roots of this problem go way back. | Nathan Monson | 2011/03/15 09:17 AM |
Roots of this problem go way back. | mpx | 2011/03/15 12:55 PM |
Roots of this problem go way back. | Mark Roulo | 2011/03/15 02:34 PM |
Roots of this problem go way back. | Rob Thorpe | 2011/03/15 04:42 PM |
Roots of this problem go way back. | Paul | 2011/03/15 05:03 PM |
Roots of this problem go way back. | Dean Kent | 2011/03/15 08:11 AM |
Design Challenges at 22nm Article | Daniel Bizo | 2011/03/14 07:06 AM |
Design Challenges at 22nm Article | Linus Torvalds | 2011/03/14 09:48 AM |
Design Challenges at 22nm Article | David Kanter | 2011/03/14 09:20 PM |
Design Challenges at 22nm Article | Dean Kent | 2011/03/15 08:16 AM |
Design Challenges at 22nm Article | David Kanter | 2011/03/14 10:05 AM |
Could you elaborate? | Daniel Bizó | 2011/03/16 06:43 AM |
IDM trade offs | David Kanter | 2011/03/16 10:54 AM |
Design Challenges at 22nm Article | Tianyi | 2012/10/18 12:24 AM |