how about Freescale LS1022A ?

By: Michael S (already5chosen.delete@this.yahoo.com), April 21, 2015 3:53 pm
Room: Moderated Discussions
EduardoS (no.delete@this.spam.com) on April 21, 2015 12:40 pm wrote:
> Ronald Maas (rmaas.delete@this.wiwo.nl) on April 19, 2015 9:53 am wrote:
> > 4) Ivan Godard mentioned he wants to target a broad range of performance levels, all the way from low-end
> > embedded to the high-end. There is no way anyone can compete successfully on the low-end with companies
> > like Allwinner and Mediatec who are able to make a healthy
> > profit selling quad code 64-bit SoC for 5 dollars
> > a piece. Better to concentrate on high-end where achieving high IPC is going to be appreciated.
>
> I was searching for a SoC a few days ago, not a quad 64 bit SoC, something more modest, in fact, any piece
> of shit with one SATA and 2 GbE, and... Well there is nothing for 5 dollars a piece, the cheapest one I find
> was $15, Allwinner have one, for $20, all 32 bit dual core, a bit overkill for my needs but ok, about those
> quad 64 bits, well... There are some pretty expensive high end SoC, quad 64 bits falls more in the high end
> side, I didn't saw any for less than $20, whe do you by your quad 64 bits SoCs for $5 a piece?
>

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=LS1020A

I have no idea what is "street price" but it fits well into your description of "any piece of shit with one SATA and 2 GbE"
< Previous Post in ThreadNext Post in Thread >
TopicPosted ByDate
My take on the Mill (hopefully using more conventional terminology)Gabriele Svelto2015/04/18 01:06 AM
  My take on the Mill (hopefully using more conventional terminology)Ronald Maas2015/04/19 09:53 AM
    My take on the Mill (hopefully using more conventional terminology)ex-apple2015/04/19 10:53 AM
    My take on the Mill (hopefully using more conventional terminology)Eric Bron nli2015/04/20 11:43 AM
      My take on the Mill (hopefully using more conventional terminology)Eric Bron2015/04/20 11:46 AM
    My take on the Mill (hopefully using more conventional terminology)Ivan Godard2015/04/20 05:27 PM
      My take on the Mill (hopefully using more conventional terminology)Ronald Maas2015/04/20 10:03 PM
      My take on the Mill (hopefully using more conventional terminology)sylt2015/04/21 09:49 AM
      My take on the Mill (hopefully using more conventional terminology)RichardC2015/04/21 12:57 PM
        My take on the Mill (hopefully using more conventional terminology)Exophase2015/04/21 02:47 PM
          My take on the Mill (hopefully using more conventional terminology)RichardC2015/04/21 03:22 PM
            My take on the Mill (hopefully using more conventional terminology)Peter Lund2015/04/22 01:35 AM
          My take on the Mill (hopefully using more conventional terminology)Gabriele Svelto2015/04/22 02:42 AM
        My take on the Mill (hopefully using more conventional terminology)RichardC2015/04/22 06:23 AM
          My take on the Mill (hopefully using more conventional terminology)EduardoS2015/04/22 06:59 PM
            My take on the Mill (hopefully using more conventional terminology)RichardC2015/04/22 07:53 PM
              My take on the Mill (hopefully using more conventional terminology)dmcq2015/04/23 02:45 AM
    My take on the Mill (hopefully using more conventional terminology)EduardoS2015/04/21 12:40 PM
      how about Freescale LS1022A ?Michael S2015/04/21 03:53 PM
        how about Freescale LS1022A ?EduardoS2015/04/21 04:44 PM
      My take on the Mill (hopefully using more conventional terminology)rwessel2015/04/21 04:40 PM
        My take on the Mill (hopefully using more conventional terminology)EduardoS2015/04/21 04:45 PM
          My take on the Mill (hopefully using more conventional terminology)Exophase2015/04/21 05:03 PM
      My take on the Mill (hopefully using more conventional terminology)Ronald Maas2015/04/21 08:09 PM
  My take on the Mill (hopefully using more conventional terminology)Maynard Handley2015/04/19 11:13 AM
    My take on the Mill (hopefully using more conventional terminology)Ivan Godard2015/04/20 05:34 PM
      My take on the Mill (hopefully using more conventional terminology)Brett2015/04/20 05:43 PM
        My take on the Mill (hopefully using more conventional terminology)Ivan Godard2015/04/20 08:59 PM
      Fixed size registers?David Kanter2015/04/21 08:26 AM
    My take on the Mill (hopefully using more conventional terminology)EduardoS2015/04/21 12:51 PM
      My take on the Mill (hopefully using more conventional terminology)Maynard Handley2015/04/21 02:02 PM
      Large register filejuanrga2015/04/21 05:01 PM
        Large register fileEduardoS2015/04/21 05:53 PM
  My take on the Mill (hopefully using more conventional terminology)Ivan Godard2015/04/20 05:08 PM
    My take on the Mill (hopefully using more conventional terminology)anon2015/04/21 10:27 PM
      My take on the Mill (hopefully using more conventional terminology)Exophase2015/04/21 10:40 PM
        My take on the Mill (hopefully using more conventional terminology)anon2015/04/23 02:59 AM
    My take on the Mill (hopefully using more conventional terminology)Gabriele Svelto2015/04/22 12:47 AM
    PLB description seems to missunderstand how TLB works.Jouni Osmala2015/04/23 03:19 AM
      PLB description seems to missunderstand how TLB works.dmcq2015/04/23 04:54 AM
      Mill is single-address-space-orientedPaul A. Clayton2015/04/23 07:00 AM
        Mill is single-address-space-orienteddmcq2015/04/23 09:17 AM
Reply to this Topic
Name:
Email:
Topic:
Body: No Text
How do you spell tangerine? ūüćä