By: jokerman (jo.delete@this.ker.man), November 24, 2022 1:13 pm
Room: Moderated Discussions
For NAND flash, to change 0 to 1, erasing and reprogramming of the whole block is needed.
Transisitons from 1 to 0 are easier to do.
Transisitons from 1 to 0 are easier to do.
| Topic | Posted By | Date |
|---|---|---|
| Is 1 more expensive than 0? | Andrey | 2022/11/21 05:23 AM |
| Is 1 more expensive than 0? | Juha Lainema | 2022/11/21 06:15 AM |
| Is 1 more expensive than 0? | Adrian | 2022/11/21 07:21 AM |
| Is 1 more expensive than 0? | anon2 | 2022/11/21 05:29 PM |
| switching between 0 and 1 is what consumes power | Heikki Kultala | 2022/11/21 07:23 AM |
| Thank you all for your answers. (NT) | Andrey | 2022/11/21 08:29 AM |
| Is 1 more expensive than 0? | Foyle | 2022/11/21 08:58 AM |
| Is 1 more expensive than 0? | Michael S | 2022/11/21 10:51 AM |
| Is 1 more expensive than 0? | Captain Obvious | 2022/11/21 11:29 AM |
| obvious stuff | anonymou5 | 2022/11/21 02:25 PM |
| obvious stuff | Andrey | 2022/11/21 02:50 PM |
| obvious stuff | Michael S | 2022/11/21 03:43 PM |
| SRAM is bistable | Anon | 2022/11/21 10:50 AM |
| SRAM is bistable | Andrew Clough | 2022/11/22 05:53 AM |
| NAND Flash 1 and 0 | jokerman | 2022/11/24 01:13 PM |
| NAND Flash 1 and 0 | Joern Engel | 2022/11/25 12:00 AM |
| NAND Flash 1 and 0 | Ungo | 2022/11/25 02:26 AM |
| The ECC needs to be stored. as ones ane zeroes (NT) | Heikki Kultala | 2022/11/25 08:31 AM |
| The ECC needs to be stored. as ones ane zeroes | anon2 | 2022/11/25 05:07 PM |
| The ECC needs to be stored. as ones ane zeroes | Heikki Kultala | 2022/11/26 12:48 AM |
| The ECC needs to be stored. as ones ane zeroes | anon2 | 2022/11/26 02:00 AM |
